TRH3031 is a rigid moulded product grey in colour utilising Kevlar fibres and a high percentage of brass chippings. TRH3031 offers excellent thermal resistance, compression and exhibits outstanding stability under heavy loads, at the same time maintaining a high resistance to wear. TRH3031 is manufactured in sheets, segments, rings and many special shapes by either machining or moulding.
TRH3031 has been specifically designed for use on medium to heavy duty industrial brake/clutch applications, especially gear tooth facings, mechanical drivers and any application requiring a high strength, high friction and low wear material. TRH3031 also can be used in hydraulic oil, but the friction coefficient will be much lower than it is used in dry conditions.
Gear teeth facing only can be produced by mould.
Features of Woven Resin Brake Lining Roll
1. Good wear resistance
2. Excellent heat resistance
3. High tensile stength
4. Suitable for riveting
Length x Width: 762mm x 762mm (30inches x 30 inches)
508mm x 508mm (20inches x 20 inches)
Thickness: Thickness: 3.2mm-22mm ( 1/8 - 7/8 inch)
For special specifications, pls contact us for information.
Recommended Operating Range
Max. Pressure, psi 2000
Max. Rubbing Speed, ft/min 5000
Max. Intermittent Temperature 650°F (340°C)
Max. Continuous Temperature 600°F (315°C)