
Reliance Controls ยท Transfer Switches & Inlets
Reliance Controls PC3020 30-Amp Generator Power Cord
Quick answer
Worth buying when the kit cord is too short to keep the generator a safe distance from doors and windows.
Reliance Controls PC3020 30-Amp Generator Power Cord Specs
| Features | 30A, L14-30 plug to L14-30 connector, 20 ft |
|---|
AMB Score: 78/100
The AMB Score is our editorial ranking, built from the spec sheet, safety features and what owners report over time. See how we score.
Our Verdict
Most transfer switch kits include a 10-foot cord, which is often too short to put the generator where it should be: outdoors, well clear of windows, doors, vents and the garage. The PC3020 is Reliance's 20-foot, 30-amp generator cord, with an L14-30 plug at the generator end and a matching L14-30 connector at the inlet end. It is a four-conductor cord, which a 120/240-volt hookup needs, and the twist-lock ends hold firmly. A cord like this is also the honest answer to the most dangerous question in generator ownership, which is whether you can just make a cord with two male ends and plug it into a dryer outlet. You cannot. A cord with a female end at the house and a male inlet on the wall is the safe version of that idea. If you need more distance than 20 feet, ask your electrician whether a longer 30-amp cord or a relocated inlet makes more sense, because voltage drop rises with length and thin cords overheat.
Pros
- Twenty feet lets the generator sit farther from the house
- L14-30 ends match the PB30 inlet and most mid-size portables
- Four-wire cord carries both hots, neutral and ground
- Twist-lock ends do not pull out under their own weight
- Made by the same company as the inlet box
Cons
- Twenty feet may still be shorter than the safe placement you want
- A heavy cord to coil and store
- Redundant if your kit's cord already reaches
Alternatives to the Reliance Controls PC3020 30-Amp Generator Power Cord
Higher-scoring options
More from Reliance Controls
- Reliance ControlsReliance Controls 31406CRK Pro/Tran Manual Transfer Switch Kit93/100 ยท See current price
-
Reliance Controls 31410CRK Pro/Tran Manual Transfer Switch Kit90/100 ยท See current price - Reliance ControlsReliance Controls TF151W Furnace Transfer Switch87/100 ยท See current price
-
Reliance Controls PB30 Power Inlet Box84/100 ยท See current price
Reliance Controls PC3020 30-Amp Generator Power Cord FAQ
What are the key specs of the Reliance Controls PC3020 30-Amp Generator Power Cord?
From the maker's spec sheet and listing: Features: 30A, L14-30 plug to L14-30 connector, 20 ft. See the full spec table above, and check the current listing before you buy, since specifications can change between production runs.
What are the downsides of the Reliance Controls PC3020 30-Amp Generator Power Cord?
Twenty feet may still be shorter than the safe placement you want. A heavy cord to coil and store. Redundant if your kit's cord already reaches. If those matter for your setup, compare it with the other transfer switch picks in the table below.
Is the Reliance Controls PC3020 30-Amp Generator Power Cord worth it?
Worth buying when the kit cord is too short to keep the generator a safe distance from doors and windows. It scores 78/100 on our AMB Score, ranking #6 of the 6 transfer switches & inlets we track. It is best for generator Cord; skip it if twenty feet may still be shorter than the safe placement you want.
Featured In
- Best Generator Transfer Switch (Best Generator Cord)