Skip to content
ALL METAL BRAKE

Glossary

What Is Interlock Kit?

Short answer

A mechanical plate on the main panel that makes it impossible to have the main breaker and the generator breaker on at the same time.

An interlock kit is a sliding plate fitted to your existing breaker panel. It physically prevents the main utility breaker and a dedicated generator back-feed breaker from both being on, which gives the same protection against back-feeding as a transfer switch.

Because it powers the whole panel, you choose which circuits to run by switching breakers on and off, and you must manage the load yourself so you stay under the generator's running watts.

Interlocks must be listed for your specific panel, are installed by an electrician with a power inlet box, and are not allowed by every local code.

More Terms

Running WattsStarting Watts (Surge or Peak Watts)Inverter GeneratorTHD (Total Harmonic Distortion)Dual Fuel GeneratorStandby GeneratorTransfer SwitchPower Inlet BoxL14-30 OutletWatt-Hours (Wh)LiFePO4 (LFP) BatteryNMC BatteryPure Sine Wave InverterUPS Mode (Pass-Through)Solar GeneratorMPPT Charge ControllerCO ShutoffParallel KitTT-30 (RV 30-Amp)Surge Protective Device (SPD)Run Time (Generator)