Skip to content
ALL METAL BRAKE

Glossary

What Is Watt-Hours?

Short answer

The amount of energy a battery or power station stores. Divide by your load in watts to estimate runtime.

Watt-hours measure stored energy. A 1,000Wh power station could in theory run a 100-watt load for 10 hours. In practice, the inverter that turns battery DC into household AC loses some energy, typically 10 to 15%, so plan on about 85% of the rated capacity for AC loads.

Runtime estimate: usable Wh รท average load in watts = hours. Fridges and freezers cycle on and off, so use their daily energy figure (often 1 to 2 kWh per day for a full-size fridge) rather than their running watts.

Don't confuse Wh with watts (W), which is how much power the station can deliver at once.

More Terms

Running WattsStarting Watts (Surge or Peak Watts)Inverter GeneratorTHD (Total Harmonic Distortion)Dual Fuel GeneratorStandby GeneratorTransfer SwitchInterlock KitPower Inlet BoxL14-30 OutletLiFePO4 (LFP) BatteryNMC BatteryPure Sine Wave InverterUPS Mode (Pass-Through)Solar GeneratorMPPT Charge ControllerCO ShutoffParallel KitTT-30 (RV 30-Amp)Surge Protective Device (SPD)Run Time (Generator)