Generac RXSW200A3
Quick answer
Generac's 200-amp service-rated automatic transfer switch, the whole-house switch for Guardian standby generators, in an outdoor aluminum NEMA 3R enclosure.
- Best for
- Whole-house Guardian installs on a 200-amp service
- Skip it if
- You are connecting a portable generator
- Type
- Automatic transfer switch, service entrance rated
- Amp Rating
- 200A
- Enclosure
- Aluminum NEMA 3R outdoor
Generac RXSW200A3 Specs
| Features | 200A service-rated automatic transfer switch |
|---|---|
| Type | Automatic transfer switch, service entrance rated |
| Amp Rating | 200A |
| Voltage | 120/240V, single phase |
| Max Generator Size | Generac single-phase standby with Evolution or Nexus controller |
| Enclosure | Aluminum NEMA 3R outdoor |
| Price band | Premium (relative to its category; check the live price) |
Specs from Generac's published spec sheet, manual and product listings. The Generac RXSW200A3 has not been bench-tested by us: its score comes from the spec sheet, safety features, certifications and owner reports. How we score.
AMB Score: 85/100
The AMB Score weighs the spec sheet against the price band, safety features and what owners report over time.
Our Verdict
The RXSW200A3 is the whole-house automatic switch that pairs with Generac's Guardian standby generators. If you are installing a Guardian on a 200-amp service, this is the switch your installer is likely to quote.
Service rated is the point. It is a 200-amp, 120/240V single-phase switch rated for service entrance use, so it can serve as the main disconnect between the meter and the house. That lets the installer put it outside between the meter and the main panel rather than adding a subpanel inside, which often simplifies a whole-house install.
Automatic, not manual. When the grid drops, the generator's controller senses it, starts the engine and the switch moves the whole house to generator power; when the grid returns, it switches back and the generator cools down and stops. Unlike a manual transfer switch for a portable, nobody has to be home.
Match the generator. Generac lists it for Generac single-phase generators with Evolution or Nexus controllers only, such as the Guardian 22kW or 26kW. With a 200-amp switch on a 22kW generator, large loads like a second AC may need load management so the generator is not overloaded. It is housed in an aluminum NEMA 3R enclosure.
Owners and installers report a clean, reliable switchover; the main complaint is that it ties you to Generac generators. For portable hookups, see our generator transfer switch guide, and read up on standby generator basics.
Pros
- 200A, service entrance rated
- Fully automatic switchover and return
- Outdoor aluminum NEMA 3R enclosure
- Pairs with Guardian Evolution and Nexus controllers
- Can serve as the service disconnect
Cons
- Works only with Generac generators
- Needs load management when the generator is smaller than peak demand
- Professional install only
Alternatives to the Generac RXSW200A3
Cheaper options
Reliance Controls 31410CRK90/100 · Upper mid-range
Reliance Controls TF151W87/100 · Budget More from Generac
Generac Guardian 22kW93/100 · Premium
Generac GP8000E93/100 · Mid-rangeGenerac iQ5200DF91/100 · Upper mid-range
Generac Guardian 24kW89/100 · PremiumGenerac RXSW200A3 FAQ
Does the Generac RXSW200A3 work with other generator brands?
No. Generac lists it for use with Generac single-phase generators that use an Evolution or Nexus controller, such as current Guardian air-cooled models. The controller and switch work as a system. Kohler and Champion standby generators use their own automatic transfer switches, such as the aXis switches Champion bundles with its 14kW unit.
What does service rated mean on a transfer switch?
A service-rated switch, like the RXSW200A3, includes a breaker that can act as the main service disconnect, so it can be installed between the utility meter and the main panel. A non-service-rated switch goes after an existing main breaker. Service-rated switches often simplify whole-house installs on a 200-amp service, but local code decides which you need.
Is the Generac RXSW200A3 worth it?
Generac's 200-amp service-rated automatic transfer switch, the whole-house switch for Guardian standby generators, in an outdoor aluminum NEMA 3R enclosure. It scores 85/100 on our AMB Score, ranking #5 of the 9 transfer switches and inlets we track. It is best for whole-house Guardian installs on a 200-amp service; skip it if you are connecting a portable generator.